Browse Teaching Resources

41-50 of 327 Results
Digital Electronics

by Enable Education

Students simulate combinational and sequential circuits and deploy them to an FPGA target. Designed for NI ELVIS III.
Amplitude Demodulation

by Emona Tims

In this lab students use the Emona Communication board to learn two methods for amplitude modulation (AM) and demodulation. Designed for NI ELVIS III.
Inertial Measurement

by Quanser Inc.

This lab explores acceleration, rotation, and magnetic field measurements using an Inertial Measurement Unit (IMU) sensor. Designed for NI ELVIS III.
Bluetooth Module

by Dr. Ed Doering | Rose-Hulman Institute of Technology

This project introduces students to data communication over Bluetooth radio, the interface theory and operation of a Bluetooth module, and UART communication. Students use myRIO and LabVIEW to send...
Reading Encoders

by Quanser Inc.

Students will decode quadrature encoder data, implement a LabVIEW VI to decode quadrature encoder data, and add direction sense and calibration functionality. Designed for NI ELVIS II/II+.
Electret Microphone

by Dr. Ed Doering | Rose-Hulman Institute of Technology

This project introduces the electret microphone to record audio signals and to monitor acoustic level.
DC Power

by Quanser Inc.

In this lab, students complete hands-on activities that focus on the conversion of DC power into either higher or lower potentials using the SMPS module. Designed for NI ELVIS III.
Angular Displacement

by Quanser Inc.

Students will calibrate a potentiometer and incremental encoder for accurately measuring angular displacements, and will examine decoding algorithms for encoders. Designed for NI ELVIS III.
LED Matrix

by Dr. Ed Doering | Rose-Hulman Institute of Technology

In this project, students learn the principles of operation of an LED matrix, and techniques for displaying patterns and animations. Students will complete the interface circuit, and use myRIO and...
Double Sideband Modulation and Demodulation (DSBSC)

by Emona Tims

Students will create a DSBSC signal and gain insight into the meaning of ā€œSuppressed Carrier," and they will use product demodulation to recover the message and examine the effect of phase and...