Browse Teaching Resources

31-40 of 123 Results | View:
Buck Regulator in Closed Loop Operation

by Dr. Nicola Femia | University of Salerno, and Texas Instruments

In this lab, students will investigate the impact of an error amplifier on output voltage DC regulation, and on the capability of rejecting output voltage AC perturbations caused by load current...
Linear Regulator Error Amplifier Operation

by Texas Instruments, and Dr. Nicola Femia | University of Salerno

In this lab, students will investigate the properties and responses of the error amplifier generated by the gate driver voltage in a linear regulator. Designed for NI ELVIS III.
Optocouplers and IGBTs

In this lab students will be looking at two devices used as electronic switches: optocouplers and insulated-gate bipolar transistors (IGBTs). Designed for use with NI ELVIS III.
Instrumentation Amplifiers

In this lab students will be looking at a configuration of op-amp amplifiers called instrumentation amplifiers through web-based simulation and hands-on circuit building. Designed for use with NI...
Lab 6: UART Serial Communication

by National Instruments

This lab allows students to explore the basics of serial communication using a microcontroller as the transmitter and the Analog Discovery 2 as the receiver. Students will explore and visualize the...
Pushbutton Switch

In this project, students discuss the essential concepts associated with a pushbutton switch and apply software-based edge detection to convert a pushbutton press into a trigger event.
Webcam

by Dr. Ed Doering | Rose-Hulman Institute of Technology

In this project, students use myRIO to acquire and process image data from a webcam. This includes configuring the webcam and acquiring and processing single images and video streams.
Keypad

by Dr. Ed Doering | Rose-Hulman Institute of Technology

This project teaches students how to interpret data from the switch array that makes up a keypad. Students complete activities that demonstrate the use of pull-up and pull-down resistors, and how...
Power Supply Project

In this lab students will build their own DC power supply and apply their knowledge through three steps: rectifying, filtering and regulating. Designed for NI ELVIS III.
Buck Regulator in L-C Filter Operation

by Dr. Nicola Femia | University of Salerno, and Texas Instruments

In this lab, students analyze the behavior of the L-C filter subjected to the square-wave voltage generated by a PWM modulated MOSFETs half-bridge. Designed for NI ELVIS III.