Browse Teaching Resources

11-20 of 123 Results | View:
Seven-Segment LED Display

by Dr. Ed Doering | Rose-Hulman Institute of Technology

This project teaches students to describe the array of LEDs wired with a common-anode connection, design the interface circuit, and recognize that blue LEDs may be connected without current-limiting...
Ambient Light Sensor

by Dr. Ed Doering | Rose-Hulman Institute of Technology

In this project, students learn the principles of operation and applications of a sonic range finder, as well as the principles of the SPI communication protocol. Students use myRIO and LabVIEW to...
Converting Between AC and DC Power

by Quanser Inc.

Students will complete lab activities to produce DC power from AC power using a rectifier, and to produce AC power from DC power using an inverter. Designed for NI ELVIS III.
Kirchoff's Voltage Law

In this lab students learn how to apply Kirchoff's Voltage Law through online simulation and then real life application. Designed for use with NI ELVIS III.
DC Power

by Quanser Inc.

In this lab, students complete hands-on activities that focus on the conversion of DC power into either higher or lower potentials using the SMPS module. Designed for NI ELVIS III.
Zener Diodes

In this lab, students will complete hands-on activities with Zener diodes to validate and explore their operation, applications, and uses. Designed for use with NI ELVIS III.
Power Systems

by Quanser Inc.

For both wind power generation and DC power supply applications, students complete activities to analyze the interactions of electrical components and efficiencies of the systems. Designed for NI...
ADC and Sampling

In this lab, students will learn about analog-to-digital conversion (ADC), sampling, and their characteristics. Designed for NI ELVIS III.
ECG Circuit Project

Students design an Electrocardiogram (ECG) circuit using Multisim Live, and then build and validate the circuit to produce the most accurate possible heartbeat reading. Designed for NI ELVIS III.
Buck Regulator Half-Bridge PWM Operation

by Dr. Nicola Femia | University of Salerno, and Texas Instruments

In this lab, students investigate the behavior of MOSFETs when configured as a half-bridge in PWM operation. Designed for NI ELVIS III.