Browse Teaching Resources

11-20 of 75 Results | View:
USB Flash Drive

by Dr. Ed Doering | Rose-Hulman Institute of Technology

This project introduces students to logging data on myRIO. Students use LabVIEW to monitor the myRIO onboard accelerometer, and saves the data as a spreadsheet onto a USB flash drive.
Seven-Segment LED Display

by Dr. Ed Doering | Rose-Hulman Institute of Technology

This project teaches students to describe the array of LEDs wired with a common-anode connection, design the interface circuit, and recognize that blue LEDs may be connected without current-limiting...
Ambient Light Sensor

by Dr. Ed Doering | Rose-Hulman Institute of Technology

In this project, students learn the principles of operation and applications of a sonic range finder, as well as the principles of the SPI communication protocol. Students use myRIO and LabVIEW to...
Converting Between AC and DC Power

by Quanser Inc.

Students will complete lab activities to produce DC power from AC power using a rectifier, and to produce AC power from DC power using an inverter. Designed for NI ELVIS III.
Reading Encoders

by Quanser Inc.

Students will decode quadrature encoder data, implement a LabVIEW VI to decode quadrature encoder data, and add direction sense and calibration functionality. Designed for NI ELVIS II/II+.
Power Systems

by Quanser Inc.

For both wind power generation and DC power supply applications, students complete activities to analyze the interactions of electrical components and efficiencies of the systems. Designed for NI...
Power Amplifiers

by Quanser Inc.

This lab focuses on the amplifiers used to drive the brushed DC motor. The lab outlines the operation of a linear power amplifier and operational theory of the pulse width modulation amplifier. The...
Gyroscope

by Dr. Ed Doering | Rose-Hulman Institute of Technology

In this project, students learn the principles of operation and application of a gyroscope. Students use myRIO and LabVIEW to calibrate a gyroscope and acquire angular velocity data via the I2C...
H-Bridge and Geared Motor

by Dr. Ed Doering | Rose-Hulman Institute of Technology

This project introduces students to H-Bridges and the operation, interface theory, and features of a DC motor and rotory encoder. Students complete an activity to build an interface circuit and use...
Photocell

In this project, students will learn the photocell principles of operation, and interface with a photocell to measure resistance and translate that to light intensity.