Browse Teaching Resources

1-50 of 84 Results | View:
In this lab, students complete activities where they prepare measurement signals to be digitized. Designed for NI ELVIS III.
In this lab students use the Emona Communication board to learn two methods for amplitude modulation (AM) demodulation. Designed for NI ELVIS III.
In this lab students learn how to apply Kirchoff's Voltage Law through online simulation and then real life application. Designed for use with NI ELVIS III.
Signals and Sensors

by Enable Education

In this lab, students will learn about sensors and the process of measuring physical signals of many different types. Designed for NI ELVIS III.
In this lab, students will learn about analog-to-digital conversion (ADC), sampling, and their characteristics. Designed for NI ELVIS III.
Linear Regulator Error Amplifier Operation

by Texas Instruments, and Dr. Nicola Femia | University of Salerno

In this lab, students will investigate the the properties and response of the error amplifier which is generated by the gate driver voltage in a linear regulator. Designed for NI ELVIS III.
In this lab, students will complete activities in data acquisition, which involves storing, analyzing and presenting data on a PC. Designed for NI ELVIS III.
In this lab students work through a hands-on lab to learn to use Multisim, to simulate the behavior of digital circuits. Designed for NI ELVIS III.
Power Electronics

by Dr. Nicola Femia | University of Salerno, and Texas Instruments

Students complete hands-on labs that cover the fundamentals of DC-DC linear regulators, DC-DC buck regulators, DC-AC inverters, and AC-DC rectifiers. Designed for NI ELVIS III.
Linear Regulator in Open Loop AC Operation

by Texas Instruments, and Dr. Nicola Femia | University of Salerno

In this lab, students will investigate the MOSFET in AC operation which are of interest in linear regulators applications. Designed for NI ELVIS III.
In this lab manual students simulate, build, and analyze circuits to learn about behaviors, characteristics, and applications of common silicon-based components. Designed for use with NI ELVIS III.
In this lab students learn theory, simulate, build, and analyze circuits to examine the main characteristics and functions of a diode. Designed for NI ELVIS III.
ECE Fundamentals 1

by The University of Virginia

Developed in collaboration with the University of Virginia, Fundamentals 1 is the first in a series of 3 course sets that redefine how the core topics of circuits, electronics, and signals and...
In this lab students learn about the applications of diodes in rectifiers and examine the components and operations of a full-wave rectifier. Designed for use with NI ELVIS III.
This course covers the fundamental concepts of circuit theory and analysis through simulation in Multisim Live, and real-life circuit-building. Designed for NI ELVIS III.
Lab 4: Full-Wave Rectifiers

by National Instruments

This lab guides students in simulating and building a full-wave bridge rectifier and in exploring the V-I characteristic of a diode. Students will also use LabVIEW to explore the individual...
Engineering Signals and Systems Second Edition Textbook

by Dr. Fawwaz T. Ulaby and Dr. Andrew E. Yagle | University of Michigan, Ann Arbor

Sophomore or Junior level textbook designed for a two-course sequence, covering continuous-time signals and systems and their discrete-time counterparts.
Electronics 102 is an online, interactive course covering basic analog electronics components such as diodes, transistors, and operational amplifiers. Designed for NI ELVIS II/II+.
In this lab students will learn about resistor-capacitor circuits, make calculations, and confirm their understanding in hands-on circuit building. Designed for use with NI ELVIS III.
In this lab students will be learning about the open-loop behavior and theory of an operational amplifier (op-amp) through hands-on applications. Designed for use with NI ELVIS III.
In this lab students will be observing the use of thyristors in hands-on circuit simulation and circuit building. Designed for use with ELVIS III.
In this lab, students will simulate comparitor circuits and deploy them to an FPGA. Designed for NI ELVIS III.
Students explore basic logic gates, boolean algebra, and deriiving cominational logic circuits using circuit simulation and PLD deployment. Designed for NI ELVIS III.
In this lab, students use Mulitisim to simulate different methods of binary addition, complete analysis, and validate circuits simulatiosn on an FPGA. Designed for NI ELVIS III.
In this lab students will learn about Kirchoff's Current Law and how to calculate unknown values using KCL then confirming with real circuits. Designed for use with NI ELVIS III.
In this lab, students will learn about Ohm's law using circuit simulation in Multisim Live and hands-on application with NI ELVIS III. Designed for use with NI ELVIS III.
Problems and Explorations in Microelectronics with NI myDAQ and Multisim

by Dr. Ed Doering | Rose-Hulman Institute of Technology

For faculty wishing to incorporate portable instrumentation into their analog electronics courses, this text provides forty end-of-chapter-style problems covering basic concepts in diodes,...
In this lab, students will complete hands-on activities with Zener diodes to validate and explore their operation, applications, and uses. Designed for use with NI ELVIS III.
Students simulate circuits to observe and analyze synchronous and asynchronous sequential circuits, D latch circuits, and SR latches. Designed for NI ELVIS III.
Students simulate combinational and sequential circuits and deploy them to an FPGA target. Designed for NI ELVIS III.
This series of tutorials teaches students digital logic fundamentals, including logic gates, logic simplification, digital comparison logic, and digital counters.
This comprehensive laboratory set for analog and digital curriculum teaches DC circuits, AC circuits, analog electronics, and digital electronics. Designed for NI ELVIS II/II+.
In this lab students will be looking at two devices used as electronic switches: optocouplers and insulated-gate bipolar transistors (IGBTs). Designed for use with NI ELVIS III.
In this lab students will be looking at a configuration of op-amp amplifiers called instrumentation amplifier through web-based simulation and hands-on circuit building. Designed for use with NI...
In this lab students will learn the fundamentals of multiplexers and demultiplexers in a hands-on lab application. Designed for NI ELVIS III.
Students will learn the functions and applications of simple logic gates, and use truth tables to to visually represent the inputs and outputs. Designed for NI ELVIS III.
This lab introduces students to the importance of frequency response when designing circuits. Students will investigate the frequency response of two amplifier circuits, one made with transistors and...
Teaching Electronics in Technical and Vocational Colleges

by Alexander McGlashan | Niagara College of Applied Arts and Technology

This set of labs is aimed at teaching introductory and advanced electronics concepts for engineering technology and technician programs.
In this lab students will learn how to recognize and analyze voltage divider and resistance bridge circuits through hands-on work. Designed for use with NI ELVIS III.
In this lab students will learn about capacitors through web-based circuit simulation and hands-on circuit-building. Designed for use with NI ELVIS III.
In this lab students will design and build a voltage level indicator, applying the knowledge they have learned into a hands-on application. Designed for use with NI ELVIS III.
In this lab students will be looking at MOSFETs; their operation, and applications in real-world examples and hands-on experiments. Designed for use with ELVIS III.
Lab 2: Active and Passive Filters

by National Instruments

This lab introduces students to filter transfer functions for passive and active filters and allows them to apply their knowledge by simulating and building these circuits.
Lab 1: RC Circuits

by National Instruments

This lab covers the basic characteristics of RC Circuits, including both DC and AC analysis, simulation, and experimentation.
Power Electronics Fundamentals

by National Instruments

The Power Electronics Fundamentals tutorials series provides an overview of power electronics basics, including topics like rectifiers, inverters, and regulators.
In this lab, students will learn about RLC circuits and how to calculate their different parts and then finally how to build them on a bread board. Designed for use with NI ELVIS III.
In this lab, students will apply their knowledge of circuits and hands-on abilities to understand components of a complex real-world device: a radio. Designed for use with NI ELVIS III.
In this lab students will learn about transformers by working with two different simulations and hands-on applications with circuits. Designed for use with NI ELVIS III.
In this lab students measure the response of an op-amp commonly used closed-loop configurations through hands-on and web-based applications. Designed for use with NI ELVIS III.
In this lab students will be looking at the important applications of transistors in the real world: importance, use, and applications. Designed for use with NI ELVIS III.