Browse Teaching Resources

1-10 of 118 Results | View:
Op-Amps

In this lab students will be learning about the open-loop behavior and theory of an operational amplifier (op-amp) through hands-on applications. Designed for use with NI ELVIS III.
EN
Thyristors

In this lab students will be observing the use of thyristors in hands-on circuit simulation and circuit building. Designed for use with ELVIS III.
EN
Ohm's Law

In this lab, students will learn about Ohm's law using circuit simulation in Multisim Live and hands-on application with NI ELVIS III. Designed for use with NI ELVIS III.
EN
RC Circuits

In this lab students will learn about resistor-capacitor circuits, make calculations, and confirm their understanding in hands-on circuit building. Designed for use with NI ELVIS III.
EN
Signal Conditioning

In this lab, students complete activities where they prepare measurement signals to be digitized. Designed for NI ELVIS III.
EN
Kirchoff's Current Law

In this lab students will learn about Kirchoff's Current Law and how to calculate unknown values using KCL, then confirming with real circuits. Designed for use with NI ELVIS III.
EN
Power Systems

by Quanser Inc.

For both wind power generation and DC power supply applications, students complete activities to analyze the interactions of electrical components and efficiencies of the systems. Designed for NI...
EN
LED Matrix

by Dr. Ed Doering | Rose-Hulman Institute of Technology

In this project, students learn the principles of operation of an LED matrix, and techniques for displaying patterns and animations. Students will complete the interface circuit, and use myRIO and...
EN
Bluetooth Module

by Dr. Ed Doering | Rose-Hulman Institute of Technology

This project introduces students to data communication over Bluetooth radio, the interface theory and operation of a Bluetooth module, and UART communication. Students use myRIO and LabVIEW to send...
EN
Seven-Segment LED Display

by Dr. Ed Doering | Rose-Hulman Institute of Technology

This project teaches students to describe the array of LEDs wired with a common-anode connection, design the interface circuit, and recognize that blue LEDs may be connected without current-limiting...
EN