Electronics Safe - Application Lab #2

The Electronic Safe project-based lab is hosted on the interactive, online platform Thinkscape.
A variety of concepts and skills developed in the digital electronics lab series will be combined to design and build an electronic safe with a 4-digit password in a project-based lab. This lab will reinforce the practical application of combinational logic circuits. It also will revisit how flip flops are used to create shift registers. The lab requires Multisim software and NI DSDB hardware. However, students are presented optional lab add-ons requiring additional hardware. The project is guided by the online, interactive platform Thinkscape.
by Enable Education
This is module 17 of 18 in the course set, Digital Electronics.

STUDENT MATERIALS


Online, interactive course hosted on the Thinkscape platform
 

INSTRUCTOR RESOURCES


Admistrative and editing access to the online, interactive course hosted on the Thinkscape platform
 

SKILLS REQUIRED

 
  • Introductory physics and circuits 

Multisim

Multisim is a circuit simulation tool built for educators to teach analog, digital, and power electronics by connecting simulation to experimentation. 

NI ELVIS

The NI Educational Laboratory Virtual Instrumentation Suite (NI ELVIS) is a versatile laboratory platform that enables educators to teach over 20 different courses across science and engineering departments. The NI ELVIS integrates 12 common lab instruments including an oscilloscope, function...

Digital System Development Board

The Digital System Development Board (DSDB) is a digital electronics and FPGA trainer board with a Zync 7020 FPGA and 19 different periphrials to program and experiment to get a hands-on understanding of digital electronics. Programmable with Multisim, HDL, or LabVIEW, the DSDB takes students from...

Required Software

Download Academic Software, Learn About Software Licensing
  • NI ELVISmx Software Suite 14.0 or later (Includes Multisim 14.0 or later and required driver) - Download
  • Vivado Webpack HL - Download 
Note: After installing the Vivado Webpack HL, an additional Digilent driver will need to be installed for NI DSDB. This will be located at C:\NIFPGA\programs\Vivado2014_4\data\xicom\cable_drivers\nt64\digilent.

Required Hardware

Purchase Engineering Education Products
Log in to submit a comment.