Measurement System Design with the NI Automated Measurements Board

In this open-ended lab, students build a specialized measurement system for a device under test (DUT). Students will design, architect, build, and validate their measurement system based on a realistic test or monitoring application.
by Enable Education


This is lab 17 of 17 in the course, Measurements and Instrumentation.


After completing this lab, students will be able to:
  1. Use the knowlege of sensors, measurements, and signal conditioning you acquired to test and measure the physical performance of an electric device.
  2. User various software analyssi techniques and tests to quantify the normal behavior of an electric device
  3. Build a sophisticated measurement software that monitors the behavior of a device and automatically detects any anomalous performance, interpret it, and take corresponding action


  • Proficiency using LabVIEW
  • Basic proficiency using ELVIS III Instruments
  • Basic knowledge of components and their behaviors


Engineering laboratory solution for project-based learning that combines instrumentation and embedded design with a web-driven experience, delivering a greater understanding of engineering fundamentals and system design.

Automated Measurements Board for NI ELVIS III

An application board for NI ELVIS III that provides students with a experimental platform for understanding and designing a signal chain for sensor integration.


LabVIEW is systems engineering software for applications that require test, measurement, and control with rapid access to hardware and data insights.

SystemLink Cloud

SystemLink™ Cloud is NI-hosted software for hosting web applications and dashboards to display data and provide instantaneous access to live systems.

Log in to submit a comment.