PXI System Setup and Maintenance
The PXI System Setup and Maintenance course is an introduction to NI PXI hardware. It explores the components of PXI systems and illustrates how to safely connect, set up, troubleshoot, and maintain the hardware.
Duration
- 10 lessons | 1.5 hours
Audience
- System technicians and/or operators who are responsible for setup, maintenance, and troubleshooting of PXI systems.
Course Objectives
- Safely and effectively set up and configure a PXI system.
- Safely insert and remove peripheral modules into compatible PXI chassis slots.
- Follow procedures for safe system operation, including ensuring proper airflow to the system and safely powering the system on and off.
- Identify and test hardware connections using NI MAX.
- Follow routine maintenance procedures to ensure safe and reliable system performance.
- Apply basic troubleshooting techniques to determine which part of the system is causing unexpected results.
Prerequisites
- Basic computer and hardware knowledge
Hardware and Software
NI Online Training courses are best utilized on systems meeting minimum requirements for best performance. Use the following guidelines:
Software
- NI MAX
- InstrumentStudio
Hardware
Use simulated hardware where applicable or the list below as a reference if you want to program and test the hardware-related exercises:
- PXIe-1092
- PXIe-1082
- PXIe-1065
- PXIe-5122
- PXIe-5644R
- PXIe-8840
- PXIe-8398
- PXIe-8399
- PXIe-4139
- PXIe-5622
- PXI-6251
- PXI-5105
- PXI-6683
Milestone
-
Lesson List
Introducing PXI
Required
Lesson
| Duration: 7 minutesView DetailsOverview of the PXI system and comparing modular instruments.Comparing PXI and PXIe
Required
Matching PXI Slots and Modules
Required
Lesson
| Duration: 8 minutesView DetailsMatch the modules with appropriate slots in the PXI chassis.Inserting and Removing a Module
Required
Lesson
| Duration: 7 minutesView DetailsExplore the steps for inserting and removing the modules properly.Setting Up a PXI System
Required
Lesson
| Duration: 11 minutesView DetailsExplore how to connect and power PXI systems with an embedded or MXI controller.Exploring NI MAX
Required
Lesson
| Duration: 9 minutesView DetailsUse NI Measurement & Automation Explorer to view and configure hardware and software․Ensuring Proper Airflow
Required
Managing Hardware Calibration
Required
Lesson
| Duration: 7 minutesView DetailsPerform self-calibration, locate calibration information, and identify when external calibration is required for PXI modules.Troubleshooting and Replacing PXI Parts
Required
Lesson
| Duration: 8 minutesView DetailsLearn how to identify issues that may occur in a PXI system and take steps to resolve them.Calculating PXI Power Requirements
Required
Lesson
| Duration: 12 minutesView DetailsCalculate power consumption and select the appropriate hardware for a system.